Creates a new SmoothTraceSvgXY instance for a given layer.
The MAIDR layer containing smooth trace data with SVG coordinates
Protected ReadonlyobserversProtectedisProtectedisTrue while AbstractTrace.getStateAt computes state at a temporarily moved cursor. Enforces (structurally, not just by documentation) that state getters never notify observers.
Protected ReadonlyidProtected ReadonlytypeProtected ReadonlytitleProtected ReadonlyxProtected ReadonlyyProtected ReadonlyzProtected ReadonlynavigationProtected ReadonlylayerProtected ReadonlysupportsAbstract property that subclasses must implement to indicate extrema support
Protected ReadonlyrotorProtected ReadonlymovableProtected ReadonlypointsProtected ReadonlylineProtected ReadonlyhighlightProtectedhighlightProtected ReadonlyminProtected ReadonlymaxProtectedoutProtectedhighlightProtectedautoplayProtectedhasThe trace's chart type. Lightweight alternative to reading
state.traceType, which eagerly computes the full audio/braille/text/
highlight state just to expose this one string.
ProtectedvaluesGets the description state for the line trace.
The description state containing chart metadata and data table
ProtectedbrailleProtectedtextProtecteddimensionGet the state for this smooth trace. Overrides the parent state to set plotType to 'smooth' for proper identification in instruction text and layer announcements.
The trace state with plotType set to 'smooth'
ProtectedaudioGets the description state for the smooth trace. Inherits from line; chartType resolves via getChartTypeLabel() using the layer's TraceType.SMOOTH, producing the human-readable label.
The description state containing chart metadata and data table
ProtectedgetGets safe row and column indices to prevent accessing undefined values
Object with safe row and column indices
Registers an observer to receive state updates.
The observer to add
Removes an observer from receiving state updates.
The observer to remove
Notifies all registered observers with the current state.
Notifies observers that an out-of-bounds condition occurred.
Utility function to compare point values for rotor functionality
boolean value
Returns true if this trace supports compare (lower/higher value) navigation. Override to false for trace types that don't use compare modes (e.g., scatter, which is all we currently have).
Returns the display name for the default data navigation mode. Override to provide a trace-specific name (e.g., "ROW AND COLUMN NAVIGATION" for scatter).
Returns the rotor's compare-mode labels and boundary-message nouns. Override to rename the two compare units for a trace-specific semantic (e.g., the candlestick delta layer uses "above line" / "below line").
Get all highlight SVG elements for this trace Used by HighlightService for high contrast mode
Array of all SVG elements, or empty array if none
Get all original (visible) SVG elements for this trace. These are the actual rendered elements, not the hidden clones used for highlighting. Used by HighlightService for high contrast mode color changes.
Array of all original SVG elements, or empty array if none
ProtectedgetComputes the trace state at an arbitrary position without moving the user's cursor or notifying observers. Used by monitor mode to sonify and announce a newly appended point while the user stays put.
The state getters read this.row/this.col internally, so the cursor
is moved temporarily and always restored in a finally block — this
method is the single owner of that pattern.
Re-entrancy hazard: this is only safe because the entire call chain is synchronous (no await points), so timers (e.g. autoplay ticks) cannot interleave before the finally-restore, and state getters never notify observers. If a getter ever becomes async or triggers notifications, callers could observe the temporary cursor.
The row of the position to compute state for
The column of the position to compute state for
The trace state at the requested position
Resets the trace to initial entry state
ProtectedgetReturns a human-readable label for this trace's chart type (e.g., 'Bar Chart', 'Scatter Plot') for display in the description modal. Falls back to the raw layer type if no mapping is registered.
ProtectedgetBuilds the axes object for the description state, including z only when the layer explicitly provides a z-axis label. Subclasses should call this instead of constructing the axes object inline so charts without a real z dimension don't surface the placeholder default.
ProtectedfinalizeCommon post-navigation cleanup that should be called by subclasses after they update their internal state
Trace-specific rotor filter units appended to the rotor cycle after the built-in data/compare/grid/intersection modes. Each unit restricts navigation to points matching a predicate (e.g. only bullish candles). Default: none. Override to opt in (e.g. Candlestick exposes bullish/bearish/neutral units). The returned list is treated as read-only by the rotor service.
Moves within an active rotor filter unit along the filtered axis.
Called by RotorNavigationService when the current rotor mode is
one of this trace's getRotorFilterUnits. Filter units navigate a
single axis, so only left/right are dispatched here — the service
announces up/down as unavailable without calling the model (matching
intersection mode). Implementations should move to the nearest point
matching the unit identified by key and notify observers, returning
true; when no such point exists they should call notifyRotorBounds
and return false.
Default is a no-op that reports bounds, so a trace advertising a filter unit but forgetting to implement movement fails safe (announces "no point found") rather than moving unexpectedly.
The RotorFilterUnit.key of the active unit
The direction to search
True if the cursor moved, false otherwise
Checks if this plot supports extrema navigation.
True if extrema navigation is supported
Base implementation for getting current X value Subclasses can override if they have different data structures
Gets the unique identifier for this trace.
The trace ID
Moves the active point to the pointer location and returns directional guidance toward the nearest data geometry in a single call.
Combining both operations avoids running findNearestPoint twice per
pointermove event — important on dense plots where the scan is the
hot path.
Screen-space x position of the pointer/finger
Screen-space y position of the pointer/finger
Guidance state relative to nearest point, or null when unavailable
ProtectedmoveMoves the trace to the nearest point when the pointer is within its bounds and the trace is not already focused on that point.
onCurve is intentionally non-optional: the caller has already paid
the cost of isPointInBounds to assemble guidance state, and
forcing subclasses to accept the value makes the contract explicit so a
future override cannot silently recompute (or worse, ignore) it.
Subclasses override this to customise hover-driven navigation:
Checks if the specified coordinates are within bounds of the element.
The x-coordinate
The y-coordinate
Object containing the SVG element and its position
True if the point is in bounds, false otherwise
Gets the line series with human-readable labels. Used by the candlestick delta feature to list reference-line candidates (e.g., moving averages).
One entry per series with its label and points
Cleans up trace resources including values and highlighted SVG elements.
Only removes elements MAIDR created (hidden clones, synthetic markers); traces that highlight the chart's original live elements in place (e.g. heatmap cells, line dots) merely drop their references so the visible chart geometry survives focusout and live-data rebuilds.
ProtectedmapGet extrema targets for the current line plot Returns min, max values, and intersection points within the current group
Array of extrema targets for navigation
Navigate to a specific extrema target
The extrema target to navigate to
ProtectedupdateUpdate the visual position of the current point This method should be called when navigation changes
Move the line plot to the position that matches the given X value
The X value to move to
true if the position was found and set, false otherwise
Base implementation of navigation in HIGHER and LOWER modes of ROTOR, default is no-op Needs to be implemented in Line, Bar, Heatmap, Candlestick
Intersection navigation mode is available only when the plot has
multiple lines. points is a 2-D array whose outer dimension is the line
index, so length > 1 means at least two lines exist — a prerequisite for
any crossing between sampled series to be possible.
Move to the next point intersection (right arrow in intersection rotor mode). Default is a no-op returning false; subclasses that advertise supportsIntersectionMode must override to provide real behavior.
Move to the previous point intersection (left arrow in intersection rotor mode). Default is a no-op returning false; subclasses that advertise supportsIntersectionMode must override to provide real behavior.
ProtectedmapMaps data points to SVG circle elements using svg_x and svg_y coordinates from the data.
Optionalselectors: string[]Optional array of CSS selectors for line elements
Array of SVG element arrays for each line, or null if selectors are invalid or all mappings failed
Represents a smooth trace with SVG coordinates for rendering data points using svg_x and svg_y values.